Adamson E12

$74,500.00

 

  • Lightly used
  • 16x Adamson E12 Boxes
    – 04x Adamson Carts
    – 04x  Adamson Covers

Call: +1(404) 682-3005

The Adamson E12 is a 3-way line array enclosure that brings large venue coverage to a format you can actually lift, built around proprietary transducer and waveguide technology engineered to cut weight while minimizing footprint. The heart of the enclosure is the E-Capsule, a precisely machined aluminum unit whose patent-pending skeletal structure gives the module an accurate, rigid frame for Adamson’s modular aircraft-grade steel Autolock rigging system, while simultaneously housing the ultra-efficient mid-high components coaxially mounted on Adamson’s modified E12 Co-Linear Drive Module. The E-Capsule is flanked by two separate, vented birch ply enclosures, each containing Adamson’s proprietary ND12-S 12-inch Kevlar and neodymium woofer, so one box delivers the output of two woofers without doubling the load on the amplifier. The result is a cabinet that behaves like a serious line array in the air but stays light enough to hang, stack, and re-rig quickly between shows.

Acoustically, the E12 is built around a critically optimized waveguide based on a prolate-spheroidal geometry, which ensures precise pattern control and minimum distortion, producing a nominal minus 6 dB dispersion of 110 degrees horizontal by 8 degrees vertical. That wide horizontal and tight vertical pattern is exactly what makes the E12 a natural fit for line arrays, side fills, and wide coverage positions. The frequency response runs 60 Hz to 18 kHz with a flat plus or minus 3 dB response, and maximum peak SPL reaches 145 dB. The mid-high energy comes from a vector-corrected, low-excursion 7-inch neodymium midrange driver paired with a next generation 4-inch high frequency compression driver, a combination that delivers seamless mid-high energy with minimized distortion even at very high levels. Power handling runs 2x 800/3200 W for the two 8 ohm woofers, 350/1400 W for the 8 ohm midrange, and 160/640 W for the 8 ohm high frequency section, all fed through 2x Speakon NL8 connectors, and the enclosure is fully compatible with Lake digital processing.

In practical terms, the E12 weighs 59.9 kg, a substantial figure for a 3-way array element, and measures a generous 43.75 inches wide by 14.1 inches high at the front face and 11.1 inches at the rear, with a 21.4 inch depth, dimensions that reward clean racking and quick loading. The integrated Autolock hardware keeps arrays rigid and repeatable show to show, and the birch ply construction with Kevlar cones means the cabinets survive the rig and travel cycle that lighter, cheaper competitors simply cannot. The E12 is at home in festival main hangs, theater and house of worship systems, corporate AV, and touring productions where consistent, controlled wide coverage matters more than raw brute force. These E12 elements have been fully inspected and tested by Arrius Pro, with drivers, crossovers, and rigging points all checked, and they are ready to deploy in any system the moment they arrive. Whether you are refreshing an aging array, scaling a design from point source to a proper hang, or building out a fixed installation, this is the element that makes the whole system sing. Contact Arrius Pro for photos, condition details, and shipping arrangements.

BrandAdamson
ConditionSecond-Hand
Ships FromNorth America

We Provide the following freight options:

Ground Freight:

When shipping domestically or when the item and client are in the same continent we can ship via ground freight.

Ocean Freight:

When shipping internationally the most cost effective way is to ship via Ocean Freight. It can take upwards of a month but if you are not in a hurry this is a cost effective option. 

Air Freight:

When shipping internationally and you need these in a timely manner the most time efficient option is Air Freight. 

 

 

  • Please note, handling times on all items can be up to 48 hours.